GTZZ-16D articulating boom lifts-DC power_scissor lift ,Cargo lift,man lift,wheelchair lift-Quentin Machinery Co., Ltd

Model	GTZZ-16D
Maximum Working Height	17.8m
Maximum Platform Height	15.8m
Maximum Horizontal Reach	10m
Platform Capacity	230kg
Maximum Up and Over Clearance	7.6m
Machine Length( stowed) Ⓓ	7.9m
Machine Width (stowed) Ⓔ	2m
Machine Height(stowed) Ⓒ	2m
Wheel Base Ⓕ	2.2m
Ground Clearance Ⓖ	0.2m
Platform DimensionⒷ*Ⓐ	1.530.761.1m
Tail Swing	0m
Turning Radius	4.5m
Drive Speed(stowed)	5km/h
Drive Speed(raised or extended)	0.8km/h
Gradeablity	30%
Solid Tire	28*9-15
Swing Speed	0~0.8rpm
Turntable Swing	360° Continuous
Platform Leveling	Automatic leveling
Platform Rotation	±80°
Hydraulic Tank Volume	70L
Machine Weight	6780kg
Control Voltage	24V
Electric motor -Drive	6.5*2kw
Battery	8*6/420V/Ah
Charger	48/40 V/A

Technical features
1 Suitable for shipyards, able to work in damp,corrosive,dusty, hot or cold environment.
2 Able to drive at all heights; drive speed decreases as platform height increases.
3 With double control modes(ground control mode and platform control mode); control mode is switchable. If platform control mode is on, ground control mode will be disabled.
4 Ground control mode can indicate temperature of engine lubricant, hydraulic oil pressure,water temperature and so on.
5 Engine has the function of restart under working state.
6 The arm is stable when stretching out,drawing back, rotating, and returning with damping mechanisms.
7 Stretching,retracting, rotate, returning and driving are proportional controlled with CVT function.
8 Reliable brake is equipped for driving and arm rotation, which can ensure that the equipment is under control during working state or on slopes. Manual rotary lock and brake release are equipped to enable the equipment can be towed.
9 If any single wheel suspends in the air, the other three wheels can still drive normally controlled by a distribution valve.
10 When the arm has an elevation angle against horizontal level, there is a limit to the drive speed.
11 Stretching out,drawing back,rotating,and returning of arms & driving can function simultaneously.
12 Working platform has automatic leveling function, and the working angle can not exceed 1.5°
13 Emergency stop button is installed on both platform control and ground control. In case of emergency situation, engine can be stopped immediately by operating the emergency stop button.
14 There is a foot pedal on the platform. Only when the foot pedal is stepped down, the equipment can be operated.
15 An Auxiliary power unit with 12v working voltage is equipped to enable the platform to lower to the ground in case of any malfunction of engine and pump.
16 There is a programmed mechanism: Only when the main arm move up to the Max. Angle, the telescopic boom can extend; Only when the telescopic boom completely draw back, the main arm can move downward.This mechanism can avoid tip-over forward and backward to ensure the stability of the equipment.
17 Working platform has a weighing function to check the loading capacity, and this weighing function is not related to the specific position in the platform. In case of overloading, there will be indication and alarm to ensure the safety.
18 There are 3 gears in the throttle control of the engine. When there is no operation for a long time, the engine will automatically switch to idling state, to save energy.
19 The move of arm will be limited when the equipment is on a ground unevenness is over 3°
20 There is working alarm during driving or arm rotation.
21 PLC and CAN are adopted to simplify the wiring and to facilitate maintenance. Air defence metal plugs are adopted with protection level up to IP65.
22 The air intake system adopts closed double filtration mechanism to meet the demand in dusty working environment, and the maintenance is very convenient.
23 Both ground control and platform control are protected with protection covers.
24 There are dust-proof and sand-proof devices at the boom end, piston rod of the cylinders and so on.
25 Driving pump is Closed Electric Proportional variable-volume pump with stepless speed regulation.
26 The equipment has devices of overheat protection and automatic stop caused by low hydraulic pressure.
27 Safety valve is installed at the hydraulic circuit to avoid extra-high pressure in hydraulic system.
28 Hydraulic cylinders are equipped with balance valves and hydraulic interlocks to ensure that hydraulic cylinders do not operate automatically. And the connection of cylinders to balance valves and hydraulic interlocks is rigid.
29 Hydraulic parts and control parts are reliable with imported well-known brands.
30 Drag chain is made of high-strength aluminum alloy to adapt to severe working environment.
31 There are hoisting rings on both chassis and turret to facilitate hoisting.
32 labels and signs are clear with defined meaning.